American Standard Right Height Elongated Toilet Triumph Cadet 3 Arkusz specyfikacji

Przeglądaj online lub pobierz pdf Arkusz specyfikacji dla Toalety American Standard Right Height Elongated Toilet Triumph Cadet 3. American Standard Right Height Elongated Toilet Triumph Cadet 3 1 stron. 2-piece round front, elongated, right height toilets
Również dla American Standard Right Height Elongated Toilet Triumph Cadet 3: Specyfikacje (1 strony), Arkusz specyfikacji (1 strony), Arkusz specyfikacji (1 strony), Arkusz specyfikacji (1 strony), Arkusz specyfikacji (1 strony), Instrukcje instalacji (4 strony), Instrukcja instalacji Pielęgnacja i konserwacja (13 strony), Instrukcja instalacji Pielęgnacja i konserwacja (4 strony), Instrukcja instalacji Pielęgnacja i konserwacja (4 strony), Instrukcja obsługi (8 strony)

Drukuj stronę
American Standard Right Height Elongated Toilet Triumph Cadet 3 Arkusz specyfikacji
TRIUMPHCADET
3ROUNDFRONTTOILET
®
❑
2490.016
• Vitreous china
• EverClean™ anti-microbial surface which
inhibits the growth of stain and odor causing
bacteria, mold, and mildew
• Low-consumption (6.0 Lpf/.6 gpf)
• Features the Cadet®3FlushingSystem
• Space saving round front siphon action
jetted bowl
• Fully-glazed 2-/8" trapway with 2" ball pass
• Generous 9" x 8" water surface area
• Close-coupled tank with flat tank cover for
superior storage
• Oversized 3" flush valve with chemical
resistant flapper
• Chrome trip lever
• Speed Connect™ tank-to-bowl
coupling system
• Sanitary dam on bowl with four point
tank stabilization
• 2 color-matched bolt caps
• 00% factory flush tested
• 5 year warranty
❑
3011.016 Round Front Bowl
❑
4007.100 Tank
NominalDimensions:
78 x 472 x 740mm (28-/4" x 8-9/6" x 29-/8")
Fixture only, seat and supply by others
AlternateTankConfigurationsAvailable:
❑
4007.500 Tank complete with Aquaguard Liner
ComplianceCertifications-
MeetsorExceedstheFollowingSpecifications:
• ASME A2.9.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
• Los Angeles Department of Water and Power
Supplementary Purchase Specification for
Non-Adjustability
ToBeSpecified:
❏ Color: ❏ White ❏ Bone ❏ Linen
❏ Seat: #5330.00 Round front Champion
solid plastic seat and cover with easy lift off feature
❏ Seat: #5282.0 Round front EverClean™
anti-microbial solid plastic seat and cover
❏ Seat: #5308.04 Round front Laurel molded wood
seat and cover
❏ Supply with stop:
© 2007 American Standard Inc.
FINISHED WALL
237mm
(9-5/16)
216mm
305mm
(12)
NOTES:
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF
305MM (2") FROM FINISHED WALL TO C/L OF OUTLET.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
*
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range
of tolerances established by ANSI Standard A2.9.2.
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
®
Slow Close
3
TRIUMPHCADET
ROUNDFRONTTOILET
718mm
(28-1/4)
25mm ± 6mm
(1 ± 1/4)
416mm
(16-3/8)
C/L OF SEAT POST HOLES
140mm (5-1/2 CENTERS)
*381mm
(15)
333mm
FINISHED
(8-1/2)
(13-1/8)
FLOOR
C/L OF OUTLET
3
®
VITREOUSCHINA
472mm
(18-9/16)
740mm
(29-1/8)
SUPPLY
AS
REQ'D.
*203mm
352mm
(8)
(13-7/8)
235mm
(9-1/4)
*152mm
(6)
Revised
08/07