DAAB DBR1-M4 Podręcznik użytkownika - Strona 7
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Odbiornik DAAB DBR1-M4. DAAB DBR1-M4 8 stron. Daab radio receivers user manual
Drukuj stronę
• Common for both the receivers
Erase all the transmitters
All the transmitters in the memory can be erased.
1.
Press the self-teach button until the LED is lit.
2 a. (DB317) Release the button and press again; the LED D1 flashes 3 times.
2 b. (DBR1-M4-1) Release the button and press again; LED's D3 and D4 flash 3 times.
3.
The memory is now completely empty.
Memory full
If the receiver's memory is full, i.e. 85 transmitters are already programmed into the receiver, LED's
D3 and D4 flash 3 times and the programming is cancelled. A transmitter needs to be removed before
another can be added.
Service fault finding
Check
The receiver doesn't working when the
transmitter button is pressed.
The transmitter's red LED doesn't come
on when a function button is pressed.
Transmission range is too short.
The transmitter's red LED is flashing.
For further help or information, please contact DAAB Portteknik.
User manual
DB317 and DBR1-M4
edition 5
Possible cause
The receiver has a faulty wiring connection. Check the
receiver's connections.
Wrong voltage supply to the receiver. Check voltage
supply to correct connection terminal.
If several transmitters are coded to the receiver, check
if any other transmitter is working.
The battery is discharged. Change battery.
The transmitter is defective. Contact DAAB Portteknik.
Faulty battery, change battery.
Antenna cables are damaged or incorrectly installed.
Faulty battery, change battery.
7