Canon Color imageCLASS X LBP1127C Pierwsze kroki - Strona 4
Przeglądaj online lub pobierz pdf Pierwsze kroki dla Wszystko w jednej drukarce Canon Color imageCLASS X LBP1127C. Canon Color imageCLASS X LBP1127C 32 stron.
Również dla Canon Color imageCLASS X LBP1127C: Pierwsze kroki (49 strony)
Drukuj stronę
For details
"Setting Up Using the Setup Guide" in the User's Guide
3.
Take note of the SSID and network key.
• Check the label on the router.
• The setting operation is easier if the router is
provided with a WPS mark.
4.
Set the access point and network key
according to the screen below.
1. Select <OK>.
2. Select <SSID Settings>.
3. Select <Select Access Point>.
4. Select the access point (SSID), and select
<Next>.
5. Select <OK>.
6. Enter a network key, and select <Apply>.
7. Select <Yes>.
• Wait until message <Connected.> is displayed.
8. Select <Close>.
• The IP address will be automatically
configured in a few minutes.
5.
Install the driver and software.
P.6 "Installing the software"
Now you are finished with the
configuration of the initial settings.
User's Guide
User's Guide
To connect via wired LAN
The machine does not come with a LAN cable.
Please have one ready, if necessary.
1.
Make sure that the computer is connected to a
router properly.
2.
Check the network settings on the computer.
3.
Connect the LAN cable.
• After connecting the cable, wait a few minutes
(until the IP address is set automatically).
• If a static IP address has been set on the
computer, set the machine's IP address manually.
4.
Install the driver and software.
P.6 "Installing the software"
Now you are finished with the
configuration of the initial settings.
Quick Setup
En
5