Air Comm Systems ACS PA100 D Instrukcja instalacji i obsługi - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Jednostka sterująca Air Comm Systems ACS PA100 D. Air Comm Systems ACS PA100 D 9 stron. Pa/siren system control unit
Drukuj stronęACS PA100(F/D) Control Unit Installation and Operations Manual
Interface Schematic
n
Connector Schematic
Figure 2 Control Unit and Amplifier Connector Schematic
The ACS PA100(F/D) wiring harness should be constructed of Tefzel aircraft wire (M22759/16 grade).
All wires to be the wire gauge as noted in the above connector schematic. Adequate protection against
wear and chafing should be taken by using a braided cable sleeving or jacket. Before completing
installation, verify that all cable connector pins are seated properly and that the connector is securely
mounted to the unit mating connector.
installing; it will be either 14VDC or 28VDC and clearly marked as such on the units data tag.
Pre-fabricated cable harnesses are available from Air Comm to expedite installation consult our
sales department for details.
Air Comm Systems, Inc.
Important please note the power of the unit before
Page 4