EKF Diagnostics Lactate Scout+ Instrukcja instalacji - Strona 12
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Przyrządy pomiarowe EKF Diagnostics Lactate Scout+. EKF Diagnostics Lactate Scout+ 18 stron. Instructions for bluetooth installation for hand-held lactate analyzer
Drukuj stronęIn the next dialog window select the option "Search automatically for
updated driver software" and wait until the installation is finished:
Attention: If you are using the Lactate Scout Data Link Software, no
additional steps are needed for the Bluetooth installation. You can proceed
directly with the installation of the software (see "Software installation and
user manual", p. 4). Otherwise continue with the installation as follows:
2. Now, switch on the Lactate Scout+ into „Setting- and Storage Mode":
Before switching on, make sure that there is no sensor plugged in the
device. Turn on the device by holding the scroll wheel depressed for 2
seconds and turn the scroll wheel until a blinking „set" and a blinking
Bluetooth® icon „ " are appearing on the LCD:
After pressing the scroll wheel briefly, the menu is activated and the
message "OFF" is being displayed on the main display together with the
blinking Bluetooth ®- icon: