Daavlin DT Home-Control Instrukcja obsługi - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt medyczny Daavlin DT Home-Control. Daavlin DT Home-Control 19 stron. Modes of operation - timed mode
Drukuj stronę•
To eliminate the risk of fire when replacing the fuse, replace ONLY with a fuse of the same
type and rating.
•
NO MODIFICATION OF THIS EQUIPMENT IS PERMITTED. Unauthorized modification will
void the warranty and may result in hazardous or improper device operation.
•
DANGER - ULTRAVIOLET RADIATION. As with natural sunlight, overexposure can cause
eye and skin injury, and allergic reactions. Repeated exposure may cause premature aging
of the skin and/or skin cancer. ALWAYS WEAR PROTECTIVE EYEWEAR: FAILURE TO
DO SO MAY RESULT IN SEVERE ERYTHEMA OR LONG-TERM INJURY TO THE EYES.
Medications or cosmetics may increase skin sensitivity to ultraviolet radiation. Inform your
physician before using this device if you are using medications or have a history of skin
problems or sensitivity to light.
•
This device should be a minimum of 12 inches (30 cm) away from RF generating equipment.
•
If the device malfunctions, cease operation immediately. If the device is placed close to other
equipment, it is possible that the cause is interference by external noise sources and fields,
in which case you should follow the remedies found under section 16.0
Specifications
. If the device continues to malfunction cease operation and contact the
Daavlin Service Department.
•
If necessary, operation of equipment may be terminated by disconnecting unit from AC mains.
This can be accomplished by unplugging the device or, if hard wired, turning off quick
disconnect.
•
Prior to each use, always verify that the device is in correct working order and operating
condition and plugs, sockets, lamps, and electrical cables and connections are not worn or
damaged.
•
The device should be placed a minimum of 1 inch (2.5 cm) away from surrounding walls,
devices, and furniture to ensure proper cooling airflow.
•
The room that the device is placed in should be vented to allow free air displacement to ensure
the device and surroundings remain cool.
•
Only original components and accessories should be used with the device to avoid damage.
•
Before opening the device casing to perform maintenance or service, disconnect the device
from the power source.
•
The device must never be directly exposed to flowing or splashing liquids of any kind. If the
device is inadvertently exposed to liquid, it must be tested for safety before being placed in
operation again.
•
The device contains glass lamps. Avoid excessive force to the device to prevent lamp
damage.
•
The device control system display is susceptible to damage from excessive force. Avoid
excessive force to the control system to prevent damage.
MNL-00049 [1]
Proprietary and Confidential. Printed copies will not be updated.
Environmental
Page 6 of 19