Donaldson Torit RWB-2000 Instrukcja instalacji i obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Urządzenia przemysłowe Donaldson Torit RWB-2000. Donaldson Torit RWB-2000 12 stron. Remote weld bench

Drukuj stronę

Introduction

CAUTION!

Misuse or modification of this

equipment may result in personal

injury.

Do not misuse or modify.

The Remote Weld Bench is an optional accessory

for dust collection systems. Standard models are

the RWB-2000, which is a 2000 cfm unit for use

with 2000 cfm dust collectors, and the RWB-3000,

a 3000 cfm unit for use with 3000 cfm dust collec-

tors. Technical and field support are always avail-

able from your local Donaldson Representative

and distributors.

Important: OSHA may have requirements regard-

ing recirculating filtered air back into your facility.

Consult with the appropriate local authorities to

ensure compliance with all applicable codes.

backdraft panel

welding work surface

Remote Weld Bench, Models RWB-2000 and RWB-3000

Operational Explanation

Normal Operation

During normal operation, the contaminated or

fume-laden air enters the Remote Weld Bench

through the backdraft. The fume-laden, incoming

air goes through the collar pack, which is ducted

to the dust collector. See Figure 2, Operational

Schematic. The dust collector that the Remote

Weld Bench is ducted to should have a flame retar-

dant filter media which can reduce the risk of fire

hazard.

Dirty Air

Figure 2, Operational Schematic

To Dust Collector