eKids TR-556 Instrukcje - Strona 2

Przeglądaj online lub pobierz pdf Instrukcje dla System karaoke eKids TR-556. eKids TR-556 2 stron. Bluetooth mp3 karaoke with microphone

Drukuj stronę

Getting Started

THIS UNIT IS SHIPPED IN DEMO MODE. PRESS

AND HOLD THE POWER BUTTON FOR 5-6

SECONDS TO ACTIVATE HOME MODE.

There are three ways to listen to music with this unit:

• In USB Mode you can connect a flash drive to the unit and listen

to your stored songs.

• In MP3 Mode you can transfer music from your computer to the

unit via the micro USB Data Transfer port. The music will save

to internal memory and you can listen to it directly

from the unit itself.

• In Bluetooth Mode you can stream music from your smartphone

or other Bluetooth device.

Note: When using USB Mode or Internal Memory Mode, this

unit is compatible with .mp3 and .wav files ONLY.

Charging The Unit

1. Connect the included micro USB cord to the micro USB charging

port on the back of the unit.

2. Connect the standard USB plug end of the cord to a power USB

port on a computer or other USB charging device.

For first time use, charge unit for about 5 hours.

Charge via USB AC adaptor, computer USB port, or other powered USB port

USB Adaptor

(not included)

Recharge

when empty

battery icon

flashes

Computer connected

to working outlet

Computer USB port

Using USB Mode

Make sure the Mode Button is set to USB.

• When the unit is OFF, connect a USB flash drive to the

USB port on the back of the unit.

• Press and hold the Power Button to turn the unit ON.

The display will read "USB".

• When a USB drive is detected, the number of files on

the USB drive will appear on the LCD display.

• Use the "Forward" and "Reverse" buttons advance through

the numbers of files on the USB drive.

• Pressing "Play" will change the display to show a countdown

time of the selected song file. After pressing "Play", the

automatic play-all function will activate, and songs will play

in the order they were stored. Press again to pause.

• Press "Forward" or "Reverse" buttons to navigate through

file numbers.

Inside the compartment:

USB port

(for USB Mode)

Volume

Down

Volume

Power

ON/OFF

Mode

LCD

Button

Display

Bluetooth

Pairing

Button

LED

Lights

Press the

Light Button

Reset

Mic

Reset

Micro USB

Microphone

Charging/

Jack

Data Transfer

In the event of interrupted operation, use

the extended wire of a paperclip or other

thin tool to press in the Reset Button.

LCD Display Icons:

USB Mode

Play/Pause/

Voice

Shuffle

Control

Bluetooth

Microphone

Mode

MP3

Voice

Mode

Control

SHU icon

Reverse

Forward

Light

Button

Microphone

ON/OFF

Using MP3 Mode

Make sure the Mode Button is set to MP3 Mode and your

USB flash drive is disconnected from the unit.

Storing Songs:

• Turn the unit ON, connect the micro USB cord to the Data

Transfer port on the back of the unit. Connect the other

end to a USB port on your computer.

• The display will read "PC". The unit should show up on

your PC or Mac as a 'drive' or 'device'.

• Locate your music files on your PC or Mac (typically in

the 'My Music' folder). Note: on some computers, your

music files may be located elsewhere. Check your user

manual for details.

• Select your desired songs ( .mp3 and .wav files are

compatible) and drag them onto the connected drive.

The unit has 1 GB of memory, which will fit approx. 300

stored songs (depending on song length/file size). When

you are finished transferring files, 'eject' the device from

your computer and disconnect the USB from the unit.

Playing Songs:

• The LCD display on the unit will show the number of

songs stored. (ex: 200 songs would appear as "02:00").

• Use the "Foward" and "Reverse" buttons to advance

through the numbers of files stored on the unit.

• After pressing "Play", the automatic play-all function will

activate, and songs will play in the order they were stored.

Using Play/Pause/Shuffle

Press and hold to shuffle songs while playing music in USB

Mode or MP3 Mode. The SHU icon will appear on the display.

Press and hold to disable shuffle. The SHU icon will disappear

from the display.

Converting Files to MP3

iTunes music files are saved by default in .m4a format, and

must be converted to .mp3 format to play on the unit in MP3

mode. Check the Help section in iTunes (or other music

software program) to learn how to convert to .mp3 format.

Using Bluetooth Mode

• Select the "Bluetooth" position on the Mode Button. The

Bluetooth Mode icon will appear on the LCD display while in

pairing mode. Turn on your Bluetooth device and make it

"discoverable" by turning on Bluetooth mode (check in Options

or Settings).

• "Karaoke 556" should appear in your device's Bluetooth menu.

If "Not Connected" or a similar message appears, select

"Karaoke 556" to connect it.

• A confirmation tone will sound once your device is paired. Put

your Bluetooth device in play mode to begin streaming music.

• Use the "Forward" "Reverse" and "Play/Pause" buttons on the

unit to navigate tracks.

• Pairing automatically occurs in Bluetooth mode. Press the

Bluetooth Pairing button on the front of the unit to re-pair.