Donco 1019 Instrukcja montażu

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Wyposażenie wnętrz Donco 1019. Donco 1019 9 stron. Twin twin mission stairway bunk bed

ASSEMBLY INSTRUCTIONS

1019 TWIN TWIN MISSION

STAIRWAY BUNK BED

Thank you for purchasing this quality product.

Be sure to check all packing materials carefully

for small parts which may have come loose

inside the carton during shipment. Separate,

identify and count all parts and hardware.

Compare with the parts list to be sure all parts

are present.

´´DO NOT TIGHTEN SCREWS

UNTIL COMPLETELY ASSEMBLED´´

SIZE OF MATTRESS AND FOUNDATION (SUPPORT)

This bed is designed to use a twin mattress ( 37 ½´´- 38 ½´´x 74 - 75´´) and bunkie board (37 ½´´x 74´´). The

total thickness must not exceed

foundation.

Note: There must be at least

REPLACEMENT PARTS.

Replacement parts, including additional guardrails, may be obtained from place of purchase or original

distributor.

TO OBTAIN PARTS, PLEASE CONTACT:

1- Follow the information on the warning label appearing on the upper bunk end structure and on the carton.

Do not remove warning label from bed.

2- Always use the recommended size mattress or mattress support, or both, to help prevent the likelihood

of entrapment or falls.

3- Surface of mattress must be at least 5 inchess below the upper edge of guardrails.

4- Do not allow children under 6 years of age to use the upper bunk.

5- Prohibit more than one person on upper bunk.

6- Periodically check and ensure that the guardrail, ladder and other components are in their proper position,

free from damage, and that all connectors are tight.

7- Do not allow horseplay on or under the bed and prohibit jumping on the bed.

8- Always use the ladder for entering and leaving the upper bunk.

9- Do not use substitute parts. Contact distributor or dealer for replacement parts.

10- Use of a night light may provide added safety precaution for a child using the upper bunk.

11- If the bunk bed will be placed next to a wall, the guardrail that runs the full length of the bed should

be placed against the wall to prevent entrapment between the bed and the wall.

12-Always use guardrails on both long sides of the upper bunk.

13-The use of water or sleep ﬂotation mattresses is prohibited.

14-Keep these instructions for future reference.

15-Strangulation Hazard - Never attach or hang items to any part of the bunk bed that are not designed for

use with the bed: for example, but not limited to, hooks, belts, and jump ropes, etc.

IMPORTANT: PLEASE READ INSTRUCTIONS BEFORE STARTING THE ASSEMBLY

inchess. Do not use mattress without the proper bunkie board of safe

inches from top surface of mattress to top edge or guardrails.

DONCO TRADING COMPANY- FORT WORTH,TEXAS

SAFETY WARNINGS!