American Standard CERATHERM T050.110 Cechy i wymiary
Przeglądaj online lub pobierz pdf Cechy i wymiary dla Termostat American Standard CERATHERM T050.110. American Standard CERATHERM T050.110 2 stron. Central thermostat less volume control
Drukuj stronę232mm
(9-1/8)
R510
1/2 NPT
R530
3/4 NPT
GENERAL DESCRIPTION:
Cast brass valve body.
handle, which sets the desired temperature. The
temperature is maintained by a wax element moving a
shuttle valve between hot and cold. Includes Hot Limit
Safety Stop. Maximum temperature limit is 112°F.
Escutcheon plate is stamped brass. Available with 1/2"
or 3/4" NPT inlets and outlets. The valve has a high flow
rate, ideal for mutiple outlet installations.
SUGGESTED SPECIFICATION:
Central Thermostat shall feature a cast brass valve body. Thermostat shall be a wax element shuttle valve. Shall also feature 1/2"
or 3/4" NPT inlets and outlets. Fitting shall be American Standard Model # T050.110.____ (Trim Kit) and R510 or R530 (Rough Valve).
© 2008 AS America Inc.
170mm
(6-3/4)
R510
1/2 NPT
R530
3/4 NPT
150mm
(5-7/8)
The single unit contains one
MODEL NUMBER:
TRIM KITS:
T050.110 Central Thermostat Trim Kit
Less volume control. L ESS Valve.
ROUGH VALVES:
R510 Rough Valve Body only
1/2" NPT inlets/outlets. L ESS Trim.
R530 Rough Valve Body only
3/4" NPT inlets/outlets. L ESS Trim.
NOTE:
• Requires separate on/off volume control.
• When used as a Bath/Shower:
EITHER
- a separate diverter valve (such as R420 or R430)
OR
- a diverter tub spout (requires twin ell - Model #8888.120)
IS REQUIRED
163mm
(6-7/16)
86mm
(3-3/8)
41mm
(1-5/8)
25mm
(1)
PRODUCT FEATURES:
Brass Casting:
Highest quality faucet material for durability
& long life.
Wax Thermostatic Unit:
between the hot and cold seats to maintain the pre-selected
constant water temperature.
Back to Back Capable:
Spring-Loaded Check Valves:
water enters the fitting, both supplies pass through the
spring-loaded check valves to prevent cross flow of hot and
cold water.
Integrated Stop Valves:
Adjustable Hot Limit Safety Stop:
hot water allowed to mix with cold. Reduces the risk of
accidental scalding. Maximum water temperature limit may be
reduced to 104 or 109 degrees Fahrenheit.
F27
CERATHERM
CENTRAL THERMOSTAT
LESS VOLUME CONTROL
42mm to 64mm
(1-11/16 to 2-1/2)
Permits shuttle valve to move
Hot and cold can be reserved.
When the hot and cold
Ensure easy cleaning and servicing.
Limits the amount of