Ekinex KNX EK-CA1-TP Skrócona instrukcja obsługi - Strona 4

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Przełącznik Ekinex KNX EK-CA1-TP. Ekinex KNX EK-CA1-TP 4 stron. 8-fold analog/binary input

Drukuj stronę

Dimensions [mm]

EK-CA1-TP

8xD.I. Dry Contacts

bus KNX

Marks

• KNX

• CE: the device complies with the Electromagnetic

Compatibility Directive (2014/30/UE). Tests carried out

according to EN IEC 63044-5-1:2019, EN 63044-5-

2:2019.

Maintenance

The device is maintenance-free. To clean use a dry cloth.

It must be avoided the use of solvents or other aggressive

substances.

Disposal

At the end of its useful life the product

described in this datasheet is classified

as waste from electronic equipment in

accordance with the European Direc-

tive 2002/96/EC (WEEE), and cannot

be disposed together with the munici-

pal undifferentiated solid waste.

Warning! Incorrect disposal of this product may

cause serious damage to the environment and hu-

man health. Please be informed about the correct

disposal procedures for waste collecting and pro-

cessing provided by local authorities.

Documentation

This datasheet refers to the release A1.0 of the ekinex

device EK-CA1-TP, and is available for download at www.

ekinex.com as a PDF (Portable Data Format) file.

File name

Device release

STEKCA1TP_IT.pdf

Warnings

• Installation, electrical connection, configuration and

commissioning of the device can only be carried out by

qualified personnel in compliance with the applicable

technical standards and laws of the respective countri-

• The use of the device in security applications is not al-

lowed. The device may however be used for auxiliary

signaling functions

• Opening the housing of the device causes the imme-

diate end of the warranty period

• In case of tampering, the compliance with the essential

requirements of the applicable directives, for which the

device has been certified, is no longer guaranteed

• ekinex

KNX defective devices must be returned to the

Updating

A1.0

01 / 2022

manufacturer at the following address: EKINEX S.p.A.

Via Novara 37, I-28010 Vaprio d'Agogna (NO) Italy

Other information

• This datasheet is aimed at installers, system integra-

tors and planners

• For further information on the product, please contact

the ekinex

technical support at the e-mail address:

[email protected] or visit the website www.ekinex.

com

• Each ekinex

device has a unique serial number on

the label. The serial number can be used by installers

or system integrators for documentation purposes and

has to be added in each communication addressed to

the EKINEX technical support in case of malfunctioning

of the device

• KNX

and ETS

sociation cvba, Brussels

this documentation without notice.

are registered trademarks of KNX As-