DOnetworks DOFree Podręcznik - Strona 9

Przeglądaj online lub pobierz pdf Podręcznik dla Zestawy słuchawkowe DOnetworks DOFree. DOnetworks DOFree 12 stron. Bluetooth wireless headset & dongle

Drukuj stronę

phone.

• Dial a number using the keypad of the cellular phone, then press TALK(or CALL) button.

The Talk button(☎) on the Headset can be used to dial out the number entered into the

cellular phone on some models.

■ Receiving a Phone call.

- Press the TALK (or CALL) button on the cellular phone or press the Talk button(☎)

on the Headset.

■ Ending a Phone call.

• Press the END button (or the appropriate button to end a call) on the cellular phone or

press the Talk button(☎) again on the Headset for 2~ 3 seconds.

■ Redial Feature.

- Some cellular phones with Redial feature can utilize the Talk button(☎) on the

Headset to redial the last number dialed from the cellular phone.

- Press the Talk button(☎) once. The display on the cellular phone will show the last

dialed number. Press Talk button(☎) again to dial that number.

※ Note: These features may not be available on all cellular phones.

4. Registering (Pairing) Headset for cellular phones with Bluetooth Headset profile.

■ Registering Headset with Dongle.

DOFree Headset and Dongle are paired at the factory.

However, there are instances where you will need to pair the Headset and Dongle (such

as using the Headset after pairing it with a Bluetooth cellular phone, etc.). To pair the

Headset with the Dongle, follow these steps:

• Turn off the Dongle(Audio Gateway) and the Headset by pressing the Talk button(☎)

until the LED stops flashing.

• Once the power is off, first press and hold the Talk button(☎) of the Headset again until

the LED turns on a solid light, not blinking light. And then press the ON/OFF button of the

Dongle(Audio Gateway), and press the Control button of the Dongle(Audio Gateway)

using a pen or sharp pencil until the LED turns on a solid light, not a blinking light.

• Release the button once the LED starts to flash. It will take several seconds for the

Headset and Dongle(Audio Gateway) to pair.

• When pairing is completed, the LED lamps on both the Headset and Dongle(Audio