American Standard NextGen Selectronic 775B.1 Series Instrukcja instalacji - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Armatura kuchenna i łazienkowa American Standard NextGen Selectronic 775B.1 Series. American Standard NextGen Selectronic 775B.1 Series 9 stron. Integrated faucet with optional above-deck mixing & smartherm temperature limiter
Drukuj stronę
ELECTRICAL INSTALLATION
Product
PWRX Power Kit
(PK00.WRK)
Plug-In AC Power Kit (PK00.PAC)
Hard-Wired AC Power Kit (PK00.HAC)
Multi-AC Power Kit (PK00.MAC)
Important: All product with standard battery come
with electrical connections preaseambled at the
factory. No further action necessary.
PWRX 10 YEAR BATTERY
A
SYSTEM; Fig. 1
PWRK
VERSION;
™
1. Connect PWRX BATTERY PACK (1) to SENSOR
CABLE (2).
2. Secure the connections by installing into CONNECTOR
LOCKING DEVICE (3) as shown. Rotate the END CAPS
(4) to secure the connection within the CONNECTOR
LOCKING DEVICE (3).
3. Determine the mounting location of the PWRX BATTERY
PACK (1) by marking center lines as shown.
4. Place the BRACKET (5) on the horizontal center line
and mark the location of the mounting holes to be drilled.
5. Using 1/4" diameter drill bit, drill two mounting holes
aproximately 1" deep.
6. Install the two ANCHORS (6) provided into the mounting
holes.
7. Place the BRACKET (5) over the ANCHORS (6)
and secure with the SCREWS (7) provided.
Do not overtighten.
8. Insert PWRX BATTERY PACK (1) into BRACKET (5).
Fig. 1
Page
4
5
5
5
BRACKET INSTALLATION
VERTICAL
C/L
4
2
1
1
HORIZONTAL
C/L
4
3
4
3
6
5
7
M965754 Rev. 1.7 (7/18)