EKKO EB12EA Series Podręcznik - Strona 14
Przeglądaj online lub pobierz pdf Podręcznik dla Systemy podnoszenia EKKO EB12EA Series. EKKO EB12EA Series 17 stron. Full electric straddle stacker
Drukuj stronęIf you need to replace the wheel, please follow the above instructions. Caster must be and no
abnormal wear round.
Check and maintain the list of items on the list.
7.1. Maintain inventory
Table4: Maintain inventory
Check the hydraulic oil cylinder, for noise and leakage
1
damage
Check the hydraulic connections and tubing for damage and
2
leakage
3
Check the hydraulic oil level, then re-fill if necessary
4
Fill the hydraulic oil (12 months or 1500 hours)
5
Check and adjust the pressure valve function (2205lbs+0/
Mechanical system
+10%)
6
Check the deformation and crack of fork
7
Check the deformation and crack of the chassis
8
Check all the screws are torqued completely
9
Check the mast and the chain for corrosion, deformation
10
Check for noise and leakage of gear box
damage, replace if necessary
11
Check for wheel deformation or damage, replace if necessary
12
Steering bearing lubrication
13
Check and lubrication center point
14
Grease nozzle
15
Protective and / or protection board, if damaged replace
The electrical system
16
Check for any wiring is damage
16
Check if any wire is damaged
17
Check the electrical connectors and connecting terminal
18
Detection of the emergency stop switch function
19
Check the electric drive motor noise and damage
20
Detection display
21
Check the use of the correct fuse, replace if necessary
22
Test buzzer
23
Check the current contactor
24
Check for leakage of the frame (insulation test)
25
Check the accelerator function and wear
26
Check the drive motor of electric system
15
- 14 -
The interval of time
1
2
6
12
(month)
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
- 14 -