Dongguan Binshi BTA007 Skrócona instrukcja obsługi - Strona 4
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Adapter Dongguan Binshi BTA007. Dongguan Binshi BTA007 6 stron.
Drukuj stronę12、 LED instructions of different mode
TX Mode
Power On
Power Off
Pair
Connected
Tips:
2.2（COMMON QUESTIONS）
1) It can be connected to the cellphone before, but cannot
be connected now.
Make sure the adapter is in RX mode, delete the paired
BTA007 in your cellphone, and double click the MFB button to
assure the adapter enter into the pair mode and search and
connect the phone again.
2) Cannot connect other Bluetooth earphones or speakers.
Make sure the adapter is in TX mode, double click the MFB
button to search, it can connect automatically. You can know
whether it has connected other Bluetooth devices by seeing the
LED of the adapter.
3) Don't know how to use different modes
Please check the explanations of 4,5,6.
4) Can it be used under charging?
Yes. However, we don't advise to use this function considering
the life of the battery.
Blue LED light
flashes 3 times
Red LED light is
off after it is on for
1 second
Blue LED light
flashes quickly
When CODEC is SBC,
blue LED light flashes
once every second;
When CODEC is APTX,
green LED light flashes
twice every ten seconds;
When CODEC is
APTX-LL, white LED light
flashes three times every
ten seconds
When it connects two devices, CODEC can be
compatible with the devices with lower-level CODEC,
APTX/APTX-LL will automatically change into SBC
mode. For example, device A: APT-LL, device B:
APTX-LL, then, CODEC=APTX-LL; If device
A=APTX-LL, device B= SBC, then CODEC=SBC.
RX Mode
Blue LED light
flashes 3 times
Red LED light is off after
it is on for 1 second
Red and blue LED
alternatively flash
When CODEC is SBC, blue
LED light is on; When
CODEC is APTX, green
LED light flashes twice
every ten seconds; When
CODEC is APTX-LL, white
LED light flashes three
times every ten seconds.