ASTi SOUND+SLEEP SE Instrukcja obsługi - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System głośników ASTi SOUND+SLEEP SE. ASTi SOUND+SLEEP SE 12 stron.
Również dla ASTi SOUND+SLEEP SE: Instrukcja obsługi (11 strony)

Drukuj stronę

1. How to Restore the Factory Settings

Getting Started

Unpack

the box which contains:

SOUND+SLEEP SE

Power Adapter

Audio Cable

User Manual (this document)

Connect Power

The power jack is located on the bottom of the SOUND+SLEEP SE. Push

the power supply plug into the jack. Slip the cord under the rubber foot by

separating the two pieces of the foot along the slit. The machine should sit

flat on a table or nightstand if the cord is installed correctly. Next, connect

the AC plug into an un-switched wall outlet. The system may take up to 30

seconds to perform a "self-test". Please note the sixteen dots around the

Dial do not light up. The Power Adapter can be used internationally with

any AC line voltage from 100 – 240 Volts, 50 or 60 Hz.

Turn on the SOUND+SLEEP SE

Unit will initialize and start playing in about 2 seconds. The Unit may be

turned Off with the Power Button, or the Sleep Timer Button (see page 6).

Note: The Unit will retain the last settings used when you last powered it off

using the Power Button. If you power it off by unplugging the Power

Adapter from the wall outlet the settings may not be saved.

Rotate the Dial

Button to select the desired sound in that category (See SoundStory Table

on page 7). Adjust the Volume with the Volume Up & Down Buttons.

Power Button

On/Off

Sound