Dongguan Taide Industrial WBT026 Skrócona instrukcja obsługi - Strona 3
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Głośniki Dongguan Taide Industrial WBT026. Dongguan Taide Industrial WBT026 4 stron.
Drukuj stronęAUX PLAYBACK OPERATION
1. Turn on the speaker.
2. Insert a 3.5mm audio cable into the aux jack on the back of the speaker, connecting to any
audio device such as mobile phones or computers with the other port.
3. press
to enter mute mode and re-press
LAMP LIGHT OPERATION
Press
1.
to turn on the lamp light
2. Press
to control the lightness.
CHARGING THE SPEAKER
The speaker has a built-in Lithium battery. The battery is rechargeable and provides approx 18
hours of continuous operation when fully charged.
Use the micro-USB cable to charge the speaker. The red indicator light will illuminate. The red
indicator light will go of when the speaker is fully charged.
VIII. COMPATIBILITY
Device equipped with BLUETOOTH 2.1 or higher version, such as the iPad, iPhone, iPod Touch
as well as a majority of "Smartphone" that support Bluetooth.
Bluetooth 2.1 including agreements as：A2DP, AVRCP, HFP.
VIII. TROUBLESHOOTING
PROBLEM
Failure in connection
and pairing
The sound is less or
distorted
Discontinuous music
The indicator for
Bluetooth mode is not
ON
Hints: Another trouble, please consult the dealer or an experienced IT technician for help.
1. Inspect whether the speaker is in search mode or restart
the devise.
2. If many Bluetooth enabled devices are switched on then it
will cause difficulty in searching the device. So, please
switch off other Bluetooth devices.
1. Inspect the volume of the Bluetooth devices and adjust the
volume.
2. The power of the battery might be insufficient. Please
charge the speaker.
Check if the effective connection distance is exceeded or
whether there are obstacles between the speaker and the
bluetooth device.
1. This indicates that the power of the battery is not sufficient.
Please try again after charging it.
2. Restart the device.
to release the sound.
SOLUTION