American Water Heater NRGSS01010 Arkusz specyfikacji - Strona 2

Przeglądaj online lub pobierz pdf Arkusz specyfikacji dla Podgrzewacz wody American Water Heater NRGSS01010. American Water Heater NRGSS01010 2 stron. American water heater indoor gas water heater specification sheet

Drukuj stronę
MODEL
GALLON
ENERGY
SERIES
NUMBER
CAPACITY
PCG6240T403NOV
40
102
PCG6250T403NOV
100
50
All dimension in inches.
Recovery capacity based on actual performance tests.
Water Connections – 3/4" on all models.
Not available in LP gas (Propane).
Certified for installations up to 10,100 ft. elevations.
B C
Flammable Vapor Ignition Resistant Water Heaters
This FVIR design meets the American National Standards Institute standards (ANSI Z21.10.1 - CSA 4.1 Standards) that deal with the
Residential gas water heater(s) shall be models ____________ as manufactured by American Water Heaters, or an approved equal, and shall have a ______ -year tank
warranty and a ______ -year parts warranty, when installed in a residential application. Heater(s) shall have a storage capacity of ______ gallons and shall have a rated
input of __________ BTUs, and shall be designed, tested and listed with CSA International in accordance with the latest edition of ANSI Z21.10.1 - CSA 4.1 standards.
Heaters shall meet the Federal Energy Efficiency Standards effective January 20, 2004, according to the National Appliance Energy Conservation Act (NAECA) of
1992. The interior of the storage tank shall be lined with a Fused Ceramic Shield lining, fused to the tank at 1600° F, forming a corrosion-resistant lining; polymer linings
are not acceptable. Each tank shall be furnished with an internal powered anode for cathodic protection. The unit must be equipped with a combination gas control
thermostat and non-reset type ECO. A corrosion-resistant drain valve shall be provided on the front of each unit. The tank shall be totally encased in a steel jacket, painted
Order Entry and Sales
500 Princeton Road (FEDEX, UPS)
Johnson City, TN 37601-2030
P.O. Box 4808 (Mailing)
Johnson City, TN 37602-4808
(800) 937-1037
FAX (800) 581-7224
No part of this work may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or by any information storage retrieval system, without permission in writing from American Water Heaters.
RECOVERY
FIRST
BTU INPUT
AT 90°
HOUR
FACTOR
PER HOUR
RISE
RATING
.70
40,000
43
70 GPH
.70
40,000
43
81 GPH
1/2"
DRAFT HOOD
T&P VALVE
A
GAS VALVE
ON/OFF SWITCH
DRAIN VALVE

FRONT VIEW

Distributed By:
NRGSS01010
FOAM
DIMENSIONS IN INCHES
THICKNESS
A
B
C
(INCHES)
2
20
61-3/4
58
2
22
60-5/8
57-1/8 50-1/2
D
F
HOT
CONNECTION

TOP VIEW

Maximum Hydrostatic Working Pressure: 150 PSI
May 2011R
DRAFT
HOOD
D
E
F
OUTLET
51-1/2
23-1/4
25
3 or 4
25-1/4
27
3 or 4
ANODE ROD
COLD
CONNECTION
8"

Warranty and Service

500 Princeton Road (FEDEX, UPS)
Johnson City, TN 37601-2030
P.O. Box 1597 (Mailing)
Johnson City, TN 37605-1597
(800) 456-9805
FAX (800) 999-5210
SHIPPING
WEIGHT
(LBS)
157
171