DONKERVOORT D8 GTO 2018 Skrócona instrukcja obsługi - Strona 11

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Samochód DONKERVOORT D8 GTO 2018. DONKERVOORT D8 GTO 2018 17 stron.

ROOF INSTALLATION

Donkervoort cars come equipped with a fabric roof as standard. This roof can be

folded to be placed in the trunk of the car. When installed correctly, the roof can

be used at all speeds. Please note that the light weight of the car and the absence of

electronic assistances make rain driving more demanding for the driver. Please

always drive carefully and adapt your speed to the weather conditions.

To mount the roof, please follow the following instructions:

Open the doors of the car halfway and leave them in this position during the

complete mounting process.

Install the carbon roof supports. First insert the pin at the front of the support in

the windscreen frame and then lay the back of the support around the rollbar and

on the B pillar.

Lay the roof on the roof supports and insert the plastic lip at the front of the roof

in the split between the windscreen frame and the windscreen. Secure the snap

buttons on both side of the windscreen support.

Secure the snaps buttons that link the tension bar to the rollbar. Push the tension

bar upwards until the straps are stretched, then pull the roof downwards and

secure the two snap buttons on both sides of the central brake light.

Secure the 4 snap buttons on each side of the roof.

When closing the doors, the the roof will fold around the upper part of the door and

seal the door opening. To dismount the roof follow the mounting instructions back-

wards.

ROOF SUPPORT

PLASTIC LIP

WINDSCREEN FRAME

SNAP BUTTON

TENSION BAR

SNAP BUTTON