Aston Martin Zygote Podręcznik użytkownika - Strona 12
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Głośniki Aston Martin Zygote. Aston Martin Zygote 20 stron.
Drukuj stronę
WI-FI SETUP IN DEPTH
There are different methods for setting up your Zygote
to against an existing Wi-Fi network. To enter Wi-Fi
setup mode, touch and hold the input selector button
for five seconds until the LED flashes in purple. When
the Zygote is connected in one way, it will exit the Wi-
Fi setup mode automatically. If the Zygote is unable
to connect, it will timeout after two minutes and leave
Wi-Fi setup mode.
Setting up the Zygote from WPS network key setting
For this alternative, the router needs to have a WPS
function. This function could be in the form of a
WPS button on the router or in the form of a function
activated from the routers web interface. If your
router does not have a WPS button, and you do not
know how to access your routers web interface, it is
highly recommended to use one of the other options.
Push the WPS button on your router. Your router will
normally remain in WPS mode for two minutes. Enter
the Wi-Fi setup mode. The Zygote is now in WPS
mode, and will remain in this mode for a maximum
of two minutes. Once both the Zygote and the router
is in WPS mode, they should connect automatically.
After having stored the Wi-Fi network settings the LED
will light for two seconds continuously in purple to
confirm the new settings are stored.
Sharing network settings from iOS over USB
For this alternative, you will need an iOS device
(iPhone, iPod or iPad) which is already connected
to your Wi-Fi network and a USB cable that is
compatible with your iOS device. Enter the Wi-Fi
setup mode. The Zygote is now in WPS mode. Once
the Zygote registers the connected iOS device, allow
it to share its Wi-Fi settings with the connected
accessory. Now the Zygote will receive its Wi-Fi
settings from your iOS device. The LED will light for
two seconds continuously in purple to confirm the
new settings are stored. The iOS device can now be
unplugged, and the Zygote should show up as a new
Airplay speaker on your iOS or OSX device.
12
Sharing network settings from iOS over Wi-Fi (WAC)
For this alternative, you will need an iOS device
(iPhone, iPod or iPad) which is connected to your
Wi-Fi network. Enter the Wi-Fi setup mode. The
Zygote is now in WPS mode. Touch the input selector
again, to enter WAC mode. On your iOS device, go
to "Settings" and "Wi-Fi". On the lower part of your
screen, select "Set up new Airplay speaker", and press
next. Your iOS device will now automatically share
its Wi-Fi settings with your Zygote. The LED will light
for two seconds in purple to confirm the new settings
are stored.
Setting up the Zygote as Wi-Fi direct
Wi-Fi direct is used if no access point is available that
the Zygote can be connected to. In Wi-Fi direct mode
the Zygote will configure itself as an access point.
Any smartphone or computer can access this from the
standard network settings. Enter the Wi-Fi setup mode.
The Zygote is now in WPS mode. Touch the LED once
to enter Wi-Fi direct mode. The LED will light for two
seconds continuously in purple to confirm that the
new settings are stored. The Zygote is now accessible
from any Wi-Fi enabled device. No network key is
required to access the Zygote in Wi-Fi direct mode.
Attention: When using the Zygote in Wi-Fi direct
mode, and you are connected to the Zygote, you will
normally not have access to Internet, as your device
will try to access Internet through your Zygote. To
access Internet, turn off the Wi-Fi connection and
access Internet from your mobile network connection,
or connect to a different Wi-Fi connection that has an
Internet connection.
Setting up the Zygote manually (Advanced)
You can set up the Zygote manually to an existing
network. This is done from the network settings in the
app or in a web browser on a computer. You need to
know the SSID and the network key for the network