Donner DEK-610S Podręcznik użytkownika - Strona 5
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Instrument muzyczny Donner DEK-610S. Donner DEK-610S 16 stron.
Drukuj stronę6. Stereo audio input
First power off the keyboard, then plug one end of the stereo audio cable into the audio input connector (AUDIO INPUT), and
the other end into the output headphone jack of another audio device, such as MP3, computers, mobile phones, tablet
computers. During playback, you can use your device to control the volume of the song for optimal listening, and please
minimize the use of the maximum volume.
AUDIO
INPUT
IV. Function operation of electronic piano
(I) . The use of power switch and tone selection
1. Press the power switch to the "On" position
At this time, the LCD screen displays the playing mode "000". When the power is turned on, the electronic piano
automatically defaults to "000" (piano tone) and "000" rhythm. At the same time, the LCD character display area will display
the English name of the tone. Press the power switch again to turn off the power supply of the electronic piano.
2. Control the total volume of the electronic piano
By turning the knob clockwise, the volume of the electronic piano and stereo audio input simultaneously increases from
small to large. By turning the knob counterclockwise, the volume of the electronic piano and stereo audio input
simultaneously decreases from large to small. For the best listening effect, use the maximum volume as little as possible.
3. Control the main volume of the electronic piano
Press the main volume control key "-" to reduce the main volume of the electronic piano, and the minimum value can be set
to "0". Press the main volume control key "+" to increase the main volume of the electronic piano. The maximum volume can
be adjusted to "16". This master volume only controls the total volume of the keyboard and does not affect the volume
control of stereo audio input.
4. The choice of tone (Tone name refer to Appendix I: Tone unified table)
Before selecting the tone, the system will choose the tone by default. If you select the rhythm, please press the "TONE "
button to return to the tone selection function, and then select the tone on the numeric keypad. At this time, the number
and English name of the tone will be displayed on the LCD.
Example: Select a tone numbered "18". Press the number key "0, 1, 8" at this time the LCD digital display shows "018" and the
English name. Select the tone number "218" and press the number key "2, 1, 8". At this time, the number of the LCD screen
will display the tone number "218" and the English name. Press the numeric "+" key, or the numeric "-" key, and the tone
number increases or decreases in sequence until you select the tone.
(II). Use of sound effects
1. Vibration
Press the "VIBRATO" button, the vibrato function point of the LCD screen will be lit, and the timbre will vibrate when playing
the electronic piano. Press this button again, the vibrato effect will be cancelled, and the vibrato function of the LCD screen
will be closed.
2. Sustain
Press the "SUSTAIN" button, and the sustain function point of the LCD screen will be lit. When playing the electronic
keyboard, the sound effect of the playing timbre can be lengthened. Press this button again, the sustain effect will be
canceled, and the LCD sustain function will be closed.
3. Metronome
Under normal conditions, every time you press the "METRONOME" key, the metronome will be 1/4 beat → 2/4 beat → 3/4
beat → Stop → 1/4 beat... For this loop, the default speed is 120.
R
L
MIC
OUT
PHONES
DC9-12V
3.5mm stereo plug
3
Other audio equipment
Output headphone jack