Astonica 50105357 Instrukcja obsługi - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wyposażenie wnętrz Astonica 50105357. Astonica 50105357 2 stron. Rivera 40'' wicker & aluminum table

Drukuj stronę
PARTS & HARDWARE LIST
PART #
DESCRIPTION
A
Glass Tabletop
B
Aluminum Legs
Support ring
C
D
6mm x 40 Bolts
E
6mm x 20 Bolts
F
Plastic Umbrella Ring
A
D
Carefully remove the contents from the package, and make sure you have
all the parts on this list. If any parts are missing do not attempt to use the
product until they have been obtained and correctly installed.
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER. CONTACT CUSTOMER SERVICE AT
1-888-424-3354.
Caution: Do not over tighten fasteners.
QUANTITY
1
4
1
4
4
1
C
B
F
E
ASSEMBLY INSTRUCTIONS
1. (See figure 1) Place the tabletop (A) upside
down on a non-scratching surface.
2. (See figure 2)Insert each leg (B) into the
pastic sleeves located underneath the
tabletop (A).
3. (See figure 3) Insert the support ring (D)
between the legs (B) and secure to (1)
leg (B) with (1) 6mm x 40 bolt (D) and (1)
6mm x 20 bolt (E). Repeat this with the
other (3) legs.
(Do not completely tighten bolts.)
4. (See figure 4) Turn table assembly right
side up on a level surface, then tighten the
bolts (D, E).
5. (See figure 4) Insert the plastic umbrella
ring (F) into the hole in the tabletop (A).
Figure 1.
A
Figure 2.
A
Figure 3.
E
A
D
B
C
Figure 4.
F
A
C
B
B