Akuvox SP-R53P Instrukcja szybkiej instalacji

Przeglądaj online lub pobierz pdf Instrukcja szybkiej instalacji dla Telefon Akuvox SP-R53P. Akuvox SP-R53P 2 stron.
Również dla Akuvox SP-R53P: Instrukcja szybkiej instalacji (2 strony)

Drukuj stronę
Configuring Your Phone
Configuring ip phone-R53 web user interface
Accessing the web user interface:
1. Press the OK key when the phone is idle to get the IP address of the phone.
2. Open the web browser on your computer, enter the IP address into the address bar (e.g.,
" http://192.168.10.10" or "192.168.10.10") and press Enter
3. Enter the user name (default: admin) and password (default: admin) in the login page
and click Confirm.
Note: Please locate your computer in the same network segment of the IP phone (192.168.10.X) to access the
web user interface. Contact your system administrator for more information.
Network Settings: Click on Network-> Basic-> LAN Port
You can configure the network in the following ways:
DHCP: By default, the phone attempts to contact a DHCP server in your network to obtain its valid
network settings, e.g., IP address, subnet mask, gateway address and DNS address.
Static IP Address: If your phone cannot contact a DHCP server for any reason, you need to
configure IP address, subnet mask, gateway address, primary DNS address and
secondary DNS address for the phone manually.
PPPoE: If you are using an xDSL modem, you can connect your phone to the Internet via PPPoE
mode. Contact the ITSP for the PPPoE user name and password.
Note: The wrong network settings may result in inaccessibility of your phone and may have an impact on the
network performance. Contact your system administrator for more information.
Account Settings: Click on Account-> Basic -> SIP AccountX(X=1,2,3)
Parameters of the account:
It shows the register status of the current account.
Status:
You can select Enabled/Disabled to enable/disable the account.
Account Active:
It is shown on the LCD to identify the account.
Display Label:
It is shown as caller ID when placing a call.
Display Name:
It is an authenticated ID for authentication provided by ITSP (required).
Register Name:
It is provided by ITSP for registration (required).
User Name:
It is provided by ITSP for registration (required).
Password:
It is provided by ITSP for registration (required).
Server IP:
Register status icons on the LCD screen:
Registered
Register Failed
Note: Check with your system administrator if any error appears during the registration process or a specific
configuration is required for your registration.
Configuring IP Phone-R53 user interface
Network Settings:
Press the Menu soft key when the phone is idle, select
-> Network-> LAN Port/PC Port/VLAN Port to configure the network.
Account Settings:
Press the Menu soft key when the phone is idle, select
-> Accounts to configure the account.
Note: For more information on account parameters, refer to
For more information, refer to the User Guide available online:
http://http://www.akuvox.com/en/down/
C
o
p
r y
g i
t h
c
2
0
1
, 3
A
K
U
V
O
, X
N I
C
.
Registering
Settings-> Advanced Settings (password:admin)
Settings-> Advanced Settings (password:admin)
Configuring IP Phone-R53 web user interface
.
Akuvox SP-R53P
www.akuvox.com
Quick Installation Guide
A
p
p
e i l
s
o t
r i f
m
w
a
e r
v
e
s r
o i
n
1
9
5
r o
a l
e t