Astonica 40200112 Instrukcja obsługi - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Fontanna zewnętrzna Astonica 40200112. Astonica 40200112 3 stron. Two tier fountain
Drukuj stronę
PARTS & HARDWARE LIST
PART #
PART #
DESCRIPTION
A
Base Pedestal
B
Large Basin
C
Center Pedestal
D
Top Basin
E
Electric Pump
Parts Detail
A
D
Carefully remove the contents from the package. If any parts are missing do not
attempt to use the product until they have been obtained and correctly installed.
NOTE: This product is intended for residential, non-commercial use.
QUANTITY
1
1
1
1
1
C
B
E
2
ASSEMBLY INSTRUCTIONS
NOTE: Tabs and notches on fountain parts are
different sizes, so they must match up
correctly to secure.
1. (SEE FIGURE 1) Place the base pedestal (A) on
flat, level surface. Put the large basin (B) on the
base pedestal (A) aligning the tabs of the basin
with the notches in the top of the base. Turn the
large basin counter clockwise to lock into place.
Put the electric pump (E) into the center ring in
the bottom of large basin (B) beside the PVC
tube. Place the power cord of the pump (E)
through the PVC tube, the pedestal base (A)
and out the bottom of the base as shown.
2. (SEE FIGURE 2) Connect center pedestal (C) to
large basin (B) by aligning the tab of the large
basin with the notch in the bottom of the
center pedestal.
E
Figure 1
Basin Tab
Power Cord
Base Notch
E
Power Cord
Figure 2
C
Basin
Tab
F
B
A
3
B
A