astra telematics AT110 Skrócona instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla GPS astra telematics AT110. astra telematics AT110 4 stron.

Revision 1.1

c. Configure your server IP Address (or hostname) and port. This is the destination that

the AT110 will deliver data reports via TCP or UDP socket connections. The

commands are:

$IPAD,<ip_address_or_hostname>

$PORT,<port_number>

NOTE: IP address should be entered WITHOUT LEADING ZEROS

d. Select the required reporting protocol (i.e. packet format) using the following

command:

$PROT,<protocol>[<module-mask>]

<prot>

please contact Astra Telematics for advice and documentation on the above

protocols

e. Select the required reporting MODE, UDP or TCP (either LOGIN based or with device

IMEI in every packet)

$MODE,<mode>

<mode>

f. Your AT110 is now configured will all the basic essentials for operation. The text

output in TeraTerm will show details of any errors.

Reporting protocol

Fixed protocol "K"

Fixed protocol "M"

Fixed protocol "P"

Fixed protocol "V"

Modular protocol "X"

Fixed packet protocol "S"

Modular Protocol "Z"

Reporting MODE

RESERVED

TCP – IMEI IN EVERY PACKET

UDP

TCP - LOGIN MODE

Legacy - not for new implementations

Carrier Transicold Refrigerator data

Legacy - not for new implementations

RECOMMENDED for new implementations

Private client protocol