astra telematics AT210 Podręcznik użytkownika - Strona 7
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla GPS astra telematics AT210. astra telematics AT210 9 stron. Vehicle tracking device
Również dla astra telematics AT210: Instrukcja instalacji (5 strony), Skrócona instrukcja obsługi (4 strony)
Drukuj stronę
Status LEDs
The AT210 has internal status LEDs as below:
During normal operation the LEDs should appear as below:
GNSS
double flash once per second
GSM
single flash every 2 seconds
POWER
stays on constantly
Enclosure Sealing
Mounting
GNSS status
GSM Network registration status
External power
When fitting the enclosure cover, please
ensure that both clips are snapped into
place to guarantee IP67 sealing. Note that
the GNSS antenna faces the top of the
enclosure (with the slots). Ensure that the
PCB is aligned with the guide slots inside
the enclosure and carefully push in until
the clips are fully engaged.
The AT210 can be secured to a
flat surface with double sided
foam adhesive tape, screwed in
place using the two mounting
lugs or secured with a single tie
wrap (up to 5mm
width).