AMERITRON AL-80A Instrukcja obsługi - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wzmacniacz AMERITRON AL-80A. AMERITRON AL-80A 6 stron. High power linear amplifier
Również dla AMERITRON AL-80A: Instrukcja obsługi (13 strony), Instrukcja obsługi (7 strony), Instrukcja obsługi (12 strony)
Drukuj stronę
,/
RF OUT
RELAY
Transmitter
or
Transceiver
---
Connection
Diagram
]
tJ
I
r
1
ALC
To Antenna
RF OUT
~
RF IN
AL80A
-
RELAY
ALC OUT
@ALC
ADJ
@
@
12 V
GND
10 AMP
ONLY
@
To
Earth
Ground
INSTAllATION
Connect the RF output of the transmitter to the RF IN
connector on the rear of the Al-80A with 50 ohm coax. Con-
nect the existing station antenna system to the RF OUT con-
nector on the Al-80A with RG-8 type coax. Connect the
RELAY phono jack on the rear of the Al-80A to the normal-
ly open terminals of the RELAY jack on the transmitter. The
RELAYjack on the Al-80A has positive 12 VDC open circuit
and provides 100 MA of current when pulled to ground. Con-
nect as short a ground lead as possible from a good earth
ground to the GND terminal.
The 12V connection on the rear panel provides 12 VDC at
100 MA maximum to operate external dial lamps or
accessories.
2
~