AMERITRON AL-82 Instrukcja obsługi - Strona 2
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wzmacniacz AMERITRON AL-82. AMERITRON AL-82 16 stron. Full power
Również dla AMERITRON AL-82: Instrukcja obsługi (16 strony)
Drukuj stronę1. Carefully remove the amplifier, transformer, and tube from their shipping cartons.
Inspect each item for visible damage. If any damage occurred during shipment,
notify the transportation company immediately.
2. Save all packing materials in case you need to return your AL-82/X/J for factory
service. The cartons have been designed to give maximum protection for this
amplifier. Any units returned without proper packing may be damaged and shipping
claims cannot be made. Contact the factory before returning any units.
3. Remove the screws that hold the cover to the amplifier. Slide the cover back and
remove it from the amplifier. Remove the package that is in the space where the
transformer will be installed. This package contains two chimneys for the 3-500Zs.
Follow the Tube Installation steps on page 5 to properly install the chimneys. There is a
small bag that contains the fuses, fuse caps and the remainder of the chassis screws
wrapped in the packing material around the anode connectors.
4. Please read the GENERAL INFORMATION and SPECIFICATIONS sections
before attempting to install the transformer and tube. Go to the INSTALLATION
section on page 4 to begin installing the transformer and tube.
5. This amplifier must always be disconnected from the power mains before removing
the cover. See the precaution on page 10. Please read the entire manual to become
familiar with the operation of the AL-82/X/J amplifier before attempting to operate this
equipment.
NOTE: The AL-82J is the Japanese export version of the AL-82 amplifier. The AL-
82J utilizes a special power transformer for use with 200V AC, 50 Hz. The AL-82J
will perform to specifications when the special transformer supplied is installed and it
will cover 160 through 10 meters.