DoorHan Sectional-1000 Instrukcja instalacji i obsługi - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Otwieracz do bram DoorHan Sectional-1000. DoorHan Sectional-1000 18 stron.
Drukuj stronę
NON-STANDARD INSTALLATION
1.
When doing a non-standard installation of the operator (at an angle of 90°). the microswitch.must be moved to a special
place. To do this:
a)
Disconnect the bottom cover of the housing and disconnect the microswitch contact of the board.
b) Disconnect the microswitch of the top housing cover.
c)
Squeeze in the new microswitch location the plug out of the hole and pull through it the microswitch contact and connect
it to the board.
d) Secure the microswitch (1) on the top housing cover with the help of self-drilling screws.
e) Mount the body of the operator.
2.
Install the splined bushing (3) on the motor shaft (2).
3.
Insert the motor (2) in the guide hole (4).
4.
Secure the motor by means of U-brackets (5) and self-drilling screws (6).
1.
Microswitch
2.
Motor shaft
3.
Splined bushing
4.
Guide
5.
U-bracket
6 x 15 self-drilling screws
6.
6
5
4
3
2
1
OPERATOR INSTALLATION
7