Canon PIXMA MP600 Skrócona instrukcja obsługi - Strona 33
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Wszystko w jednej drukarce Canon PIXMA MP600. Canon PIXMA MP600 36 stron. Personal printing guide
Również dla Canon PIXMA MP600: Zacznij tutaj (2 strony), Broszura (2 strony), Podręcznik uzupełniający (6 strony)
Drukuj stronę
5
Remove the new ink tank from its packaging,
then pull the orange tape in the direction of
the arrow (A) so that the protective film does
not remain on the air hole (B). Then remove
the film completely (C).
6
Remove the orange protective cap (A) from
the bottom of the ink tank.
Carefully hold the protective cap when removing it
to prevent the ink from staining your fingers.
Discard the cap once it is removed.
Important
Do not touch the electrical contacts (B) on the ink tank.
Doing so can cause the machine to malfunction or
become unable to print.
7
Insert the front end of the ink tank into the
Print Head.
Make sure the position of the tank matches the
label (A).
8
Press on the
the ink tank snaps firmly into place.
Confirm that the ink lamp (A) lights up red.
mark on the ink tank until
(C)
(A)
(A)
Replacing an Ink Tank
(A)
(B)
(B)
(A)
31