Canon PIXMA MP640 Instrukcja konfiguracji sieci - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja konfiguracji sieci dla Wszystko w jednej drukarce Canon PIXMA MP640. Canon PIXMA MP640 16 stron. Installing your multifunction
on additional computers
Również dla Canon PIXMA MP640: Katalog części (7 strony), Instrukcja obsługi dla sieci (24 strony), Instrukcja obsługi dla sieci (19 strony), Instrukcja instalacji sieciowej (19 strony), Instrukcja instalacji (8 strony)
Drukuj stronę
Access point was not detected is Displayed
Check
The message appears when no access point is found.
Refer to "The Target Access Point is Not Displayed
(Detected)" on page 1.
Multiple access points with the same name exist. is Displayed
Check
The message appears when multiple access points with the
same name are found.
When you have only one access point
Select Use one AP only, then select the MAC address of
the target access point.
•
For subsequent operations, go to step
Access Point's Wireless LAN Settings Directly on the Machine"
on page 7.
•
For details on how to check the MAC address of the access
point, refer to the manual supplied with the access point or
contact its manufacturer.
When using multiple access points
Select Use multiple APs.
•
For subsequent operations, go to step
Directly on the Machine" on page 7.
Glossary
•
MAC address
A unique number assigned to each network device.
in "Entering the
in "Entering the Access Point's Wireless LAN Settings