DAC Limited 711 Series Podręcznik użytkownika - Strona 4

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Telefon DAC Limited 711 Series. DAC Limited 711 Series 12 stron. Vandal resistant full keypad telephones
Również dla DAC Limited 711 Series: Podręcznik użytkownika (6 strony)

Drukuj stronę
Wall Surface Installation
1.
Fix the surface
mounting back box to the
wall, with cut-out at the bottom,
using size 8 or 10 screws with
rawplugs (4 off).
2.
Connect the cabling, as
detailed under Electrical
Connections, and then fit to the
back box (as described under Wall
Flush Installation, item 3).
3.
Use any suitable silicone
waterproofing sealant (such as
Unibond Waterproof Flexible
Frame Sealant) to seal to the back
box. Leave a 12mm to 13mm
(0.5") gap at the bottom for
drainage.
Top-of-pole Installation
1.
Place the top-of-pole
mounting over the top of the
pole.
2.
Tighten the grub screws
to secure the mounting.
3.
Fix the surface mounting
back-box to the top-of-pole
mounting with the screws
provided.
4.
Connect the cabling, as
detailed under Electrical
Connections, and then fit to the
back-box (as described under
Wall Flush Installation, item 3).
Page 3