DAC Limited 711 Series Podręcznik użytkownika - Strona 7
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Telefon DAC Limited 711 Series. DAC Limited 711 Series 12 stron. Vandal resistant full keypad telephones
Również dla DAC Limited 711 Series: Podręcznik użytkownika (6 strony)
Drukuj stronęTO STORE AN AUTODIAL NUMBER.
Insert the keypad that is supplied with the telephone into
connector marked CN13. [see page 8 for correct orientation]
To store a number in a one button autodialler.
Press the button on the front panel to go off hook. Press the key
marked PG on the rear of the telephone followed by M1. Then
using the keypad supplied dial the number that needs to be
stored followed by PG on the back of the telephone. To
cleardown press the key marked ON HK.
To store a number in a two button autodialler.
Follow the above instructions for button one. Button two is a
repeat of button one, however press M2 to allocate the autodial
number to button 2.
When programming is complete remove the external
keypad and store safely. The memories on the 711 will not
be lost if the line is disconnected
USE OF THE 711
To make a call press the desired autodial button, you will hear
dial tone, and then the number will be dialled.
When the telephone is off hook the red LED will be illuminated.
The call will clear down on detection of the line disconnection
tones or after a preset time if using the timer option (see setting
up the 711 features).
To answer a call when the 711 is ringing, press any button.
Page 6