Canon PIXMA MX512 Podręcznik

Przeglądaj online lub pobierz pdf Podręcznik dla Wszystko w jednej drukarce Canon PIXMA MX512. Canon PIXMA MX512 4 stron. Guide for printer setup for network [spanish version]
Również dla Canon PIXMA MX512: Podręcznik dla początkujących (4 strony), Instrukcja konfiguracji (22 strony), Instrukcja instalacji (7 strony), Instrukcja konfiguracji (3 strony), Konfiguracja faksu (2 strony), Specyfikacja (2 strony), Konfiguracja (29 strony), Instrukcja instalacji (17 strony), (Angielski) Podręcznik konfiguracji (22 strony)

Canon 30-241 Ink Cartridge Reset – Pixma iP/MP/MX/MG Series

The following procedures may be used to reset the Canon printer ink level monitoring

following the installation of a refilled Canon 30, 31, 40, 41, 50, 51, 210, 211, 240, or 241

integrated ink cartridge. In most cases, the error/alert will need to be cleared to enable

printing. Ink waste container reset procedures are also provided below.

NOTE:

for multi-cartridge installation, the procedure(s) may need to be repeated twice.

A. Pixma iP/MP/MX/MG Ink Counter Reset*

a. At computer screen message, select 'Stop'/'Reset', 'OK', or 'Resume',

or....

b. Select 'Stop'/'Reset', 'OK' or the 'Resume' button (triangle-circle icon) on your printer for 5

seconds.

Printing may continue under the 'ink out' condition.

B. Pixma iP Ink Counter Reset**

a. Press and Hold the Resume (triangle-circle) button

b. Press and Hold the Power Button; hold both buttons for 5 seconds

c. Release the Resume (triangle-circle) button.

d. Press the Resume button 5 times.

e. Release the Power button. The blinking ink level/power light should go steady after a few

seconds.

Printing may continue under the 'ink out' condition.

C. Pixma MP/MX/MG Series: General Printer & Ink Counter Reset***

a. Press the power button to turn off the printer.

b. Hold the "Stop/Reset" button while pushing the power button. While still holding down the

power button, release the "Stop/Reset" button and then push it twice in a row.

c. Wait approximately 20 to 30 seconds until the LED shows 0.

d. Push the "Stop/Reset" button four (4) times in a row.

e. Push the power button twice.

Turn off the printer by pushing the power button one more time. The printer is now reset.

Next, reset the cartridge ink counter:

a. Unplug the power and the USB cables from the printer.

b. Open the cartridge door and hold down the power button.

(UNIVERSAL RESET Procedure #1)

(Procedure #2)

(Procedure #3.a)