Canon PIXMA MX700 Series Instrukcja konfiguracji sieci - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja konfiguracji sieci dla Wszystko w jednej drukarce Canon PIXMA MX700 Series. Canon PIXMA MX700 Series 32 stron. Office all-in-one printer
Również dla Canon PIXMA MX700 Series: Instrukcja czyszczenia (7 strony), Podręcznik uzupełniający (6 strony), Instrukcje konfiguracji (2 strony), Broszura i specyfikacje (2 strony), Informacje techniczne (2 strony), Instrukcja serwisowa (44 strony)

If "Communication with the Card Slot failed." is

displayed, click Retry. If it still fails, click Skip to

complete the setup. Then try the network setup of

the Card Slot using the Canon IJ Network Tool.

Note

If "Cannot map any more drives, because all the

drive letters are assigned." is displayed, click Skip

to complete the setup. After software installation is

complete, remove any drive letter and try the

network setup of the Card Slot again using the

Canon IJ Network Tool. For details, refer to "Using

the Card Slot over a Network" in the User's Guide

on-screen manual.

If "The Card Slot is already mapped as Network

Drive to this computer." is displayed, the Card Slot

is already set up. Click OK, then click Next.

When the Setup Completion dialog box

appears, remove the USB cable, then click

Finish.

The network connection between the machine and

the computer is now successfully established.

To confirm the setup results, click View Setup

Results.

Note

To change the port name, click View Setup

Results, then click Set Port Name on the

Setup Results dialog box. For details

"Changing the Port Name" in "Troubleshooting" in

the User's Guide on-screen manual

If "Unsafe Removal of Device" is displayed, click

OK.

When the Setup Complete screen appears,

click Next.

, refer to