Canon PIXMA MX850 Instrukcja konfiguracji sieci - Strona 31
Przeglądaj online lub pobierz pdf Instrukcja konfiguracji sieci dla Wszystko w jednej drukarce Canon PIXMA MX850. Canon PIXMA MX850 43 stron. Multifunction brochure
Również dla Canon PIXMA MX850: Podręcznik uzupełniający (6 strony), Instrukcje konfiguracji (2 strony), Broszura (2 strony)
Drukuj stronę
- 1. Setup Outline
- 2. Setting up the Machine and the Computer (Windows)
- 3. Preparing for Setup
- 4. Installing the Software
- 5. Setting up for Use over Wired Lan
- 6. Setting up the Machine and the Computer (Macintosh)
- 7. Cannot Connect to the Machine (the Machine Is Not Detected)
- 8. Setting up the Machine Again for Use over Network
10
On the Canon IJ Network Scanner Selector
screen, select Canon XXX Network (where
"XXX" is your machine's name) in TWAIN
Data Source Name and the MAC address of
the machine in Network Device List, then
click Apply to use the machine as a scanner.
Confirm that a check mark is displayed, then click
Exit to close the dialog box.
The setup of the machine and the computer is
complete.
Note
To confirm the machine's MAC address, display the
machine's network setting information. See
"Checking Information about the Network" on
page 38.
For details on how to scan, refer to the User's
Guide and Scanning Guide on-screen manuals.
After the installation is complete, start up the Canon
IJ Network Tool to mount the Card Slot. For details
on the network setup of the Card Slot, refer to
"Using the Card Slot over a Network" in the User's
Guide on-screen manual.
Setting Up the Machine and the Computer (Macintosh)
29