Astralpool QB600 Instrukcja obsługi - Strona 11
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odkurzacz basenowy Astralpool QB600. Astralpool QB600 16 stron.
Drukuj stronę
QB robotic cleaner
Cleaner
Cleaner
Max
Floating Cable
Length
Figure 14. Pool Entry Point for Reduced Tangling
If tangling occurs, follow these steps:
1.
Remove the cleaner from the pool using the Elevate
System. When the cleaner is within arm's reach, use the
handle to remove from the water. Never remove the
from the pool by the floating cable or swivel.
2.
Hold the cleaner vertically to drain.
Figure 15. Keep Cleaner Vertical to Drain Water
3.
Unplug power to the cleaner at the control box.
Figure 16. Unplug
Owner's Manual
Not
Recommended
Caddy /
Control Unit
Recommended
entry point
WARNING: Do not use
an extension cord
4.
Remove the cleaner from the pool and untangle all
kinks and coils in the power cable. Start at the cleaner
head. Lay the cable in the sun to loosen any tangling
memory.
Figure 17. Untangle the Power Cable
5.2
Clean the Filter Canister
The filter canister should be cleaned at the end of each
cycle.
1.
Remove the cleaner from the water using the Elevate
System and let the remaining water drain.
2.
Set the unit on a flat surface.
3.
Lift the cover lock into a vertical position.
Figure 18. Lift the Cleaner Cover
4.
Remove the filter canister assembly from the cleaner
body.
11