Acer AcerPower 2000 Instrukcja instalacji - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Pulpit Acer AcerPower 2000. Acer AcerPower 2000 22 stron. Acer acerpower 2000 desktop specifications
Również dla Acer AcerPower 2000: Specyfikacje (2 strony)
Drukuj stronę
4.1.3
Post-installation Instructions
Observe the following after installing a system component:
1. See to it that the components are installed according to the step-by-step
instructions in their respective sections.
2. Unplug the system unit.
3. Make sure you have set all the required jumpers. See section 2.3.2 for the
correct jumper settings or refer to the jumper setting label pasted inside the
system cover.
Figure 4-1 Jumper Setting Label Location
4. Replace any expansion boards or peripherals that you removed earlier.
5. Replace the system cover.
6. Connect the necessary cables and turn on the system.
Chapter 4 - Installing Optional Components
jumper settings
label
4-3