Cognex DataMan 700 series Skrócona instrukcja obsługi - Strona 4
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Czytnik kodów kreskowych Cognex DataMan 700 series. Cognex DataMan 700 series 14 stron. Id readers
Drukuj stronę
e
USB and PS/2 Keyboard Connections
USB
USB Serial
>
USB Keyboard
PS/2 Keyboard
4
>
1
2
6 DataMan 700 Series Quick Reference Guide
Code
1. Connect USB cable (DM700-
USB-00) to USB port.
?
2. Scan code for serial port or
keyboard emulation. Note:
You must use serial emulation
mode to connect to the
DataMan Setup Tool.
?
1. Connect serial cable. Do
not connect power supply;
reader powered through PS/2
connection.
3
2. Connect keyboard wedge
cable. Reader automatically
detects connection type.
3. (Optional) PS/2 keyboard;
with no keyboard present, all
keyboard input comes from
reader.
4. PC with PS/2 keyboard
connector.
RS-232 Serial Connections
+6 VDC
GND
1
DM100-PWR-00
2
3
DMA-24VKIT-00
1. 6VDC power supply
2. Serial cable (DM700-RS232-00).
Provide +5 to +6 VDC to connector
on reverse or on pin 1.
3. (Optional) 24V to 5V power supply
adapter (not included). Provide +6 to
+24 VDC on pin 1; connect shield to
ground. Adapter also converts TTL-
level RS-232 signals to true RS-232
levels.
4. (Optional) Screw terminal plug
(included with 24V-6V power supply
adapter); use for your equipment.
DataMan 700 Series Quick Reference Guide 7
5
GND
9
Reserved
4
N/C
8
RTS
3
RxD
7
CTS
2
TxD
6
N/C
1
+6 VDC PWR
1
+6 – +24 PWR
4
9
N/C
2
N/C
10 N/C
3
N/C
11 CTS
4
N/C
12 RTS
5
N/C
13 N/C
6
RxD
14 N/C
7
TxD
15 N/C
8
GND