Astrel Instruments AST-8300-A Automanualr Manual - Strona 14
Przeglądaj online lub pobierz pdf Automanualr Manual dla Aparat cyfrowy Astrel Instruments AST-8300-A. Astrel Instruments AST-8300-A 14 stron.
Również dla Astrel Instruments AST-8300-A: Pierwsze kroki (20 strony), Podręcznik użytkownika (6 strony)
Drukuj stronęAstrel Instruments
AST-8300-A
1. Everything on the photographic setup should be tightened: focusers, camera mounts,
mounting of the optical tubes to each other and to the telescope mount, mounting of the
mount head to the tripod/column, etc. The camera wires shouldn't dangle. The floppy
cable parts should be as short as possible.
2. It is recommened to induce small imbalance along RA in the direction opposite to the
diurnal rotation.
3. If the guiding star is too bright, It is recommended to adjust camera (if the hardware
allows) to eliminate overluminance.
4. The change in camera parameters (Gain, FPS, etc.) requires the obligatory recalibration
of the camera with the dark frame, if it is used.
5. It is recommended to use the two-axes calibration method in the near-polar regions,
where the drift along RA is very short during the calibration.
AUTHOR
Andrew Stepanenko (Galaxy Master) <[email protected]>
AST8300 CCD camera version porting: Andrea Ricciardi <[email protected]>
PROJECT PAGE
http://sourceforge.net/projects/linguider/
SUPPORT
Autoguider Manual
14/14
rev A