AmerTac Westek TMDW60 Instrukcje
Przeglądaj online lub pobierz pdf Instrukcje dla Przełącznik AmerTac Westek TMDW60. AmerTac Westek TMDW60 2 stron. Smart digital wall switch timer
Drukuj stronę
Smart Digital Wall Switch Timer Instructions
ASTRONOMICAL TIMER INSTRUCTIONS
After time, date, location and sunrise/sunset information is entered, this timer will automatically adapt
to seasonal changes in daylight hours without reprogramming.
BUTTON DESCRIPTIONS
ON/OFF: Timer Override (Push to turn ON/OFF); if timer is on currently, it will be turned off; if timer is off currently, it will be turned on.
If the timer door is closed during normal operation Pressing on the door will activate the ON/OFF, timer override switch.
RESET: Push to clear all settings.
q/RND: During normal program operation, push once to randomly, vary ON/OFF times within 2-30 minutes of programmed times.
qorp: Use during programming to scroll through menu options or increase and decrease time and date settings
AUTO: Push when programming is complete to activate timer.
SETUP: Push once to set Calendar/Clock; push twice to set or change programming.
ENTER: Push to confirm menu selections during programming.
Note: if no button is pressed for 30 seconds, timer will get back to current timer.
PROGRAMMING
Initial setup
Setting the calendar , Clock, DST, Zone
1. On initial power-up, use a paper clip or pen to press the RESET button, and clear the program in the timer. When the reset button is released, the
screen will be flashing 12:00 AM.
2. Press the SETUP button and CAL will be flashing on the screen. Press ENTER to begin setting the Calendar.
3. The year will be flashing. Use the qor p buttons to select the year. Press ENTER to confirm the setting.
4. The month will be flashing. Use the qor p buttons to select the current month. Press ENTER to confirm selection.
5. The day will flashing. Use the qor p buttons to select the current day. Press ENTER to confirm selection.
6. The screen should be blinking CLK for Clock. Press ENTER to begin setting the clock.
7. The hour and AM or PM should be blinking. Use the qor p to select the correct hour. If you pass 11 to 12, you will change the AM to PM. Once the correct hour is found, press ENTER to confirm the selection.
8. The minutes should be blinking. Use the qor p to select the correct minute. Press ENTER to confirm.
9. The screen should be blinking DST for "Daylight Savings Time". Press ENTER to select DST.
10. DST is either ON or OFF. DST will automatically reset the times in the timer to match the time change. Use the qor p button to select the desired DST setting, and press ENTER to confirm the selection.
11. The screen should show the word ZONE blinking. Press ENTER to select your ZONE. Look at the map below and determine which zone best fits your location. Use the qor p to scroll through the available zones in the timer, and stop when you find
the zone which describes the location where the timer is being installed. Press ENTER to confirm the selection.
The screen will show DAWN (Sunrise) and a time with the hour blinking. This is the timer's preset time for Dawn. If the hour is not correct, use the qor p buttons to adjust the hour to match DAWN for your area. Once the hour is correct, press
ENTER to confirm the selection and move to the next step. The minutes are now blinking. If the minutes are not correct, use the qor p buttons to adjust the minutes to match DAWN for your area. When the minutes are correct, press ENTER to
confirm the selection.
Alaska
North
Central
South
Now that you have chosen the days, the timer will function, and the next step is to choose the time. The screen should show DAWN blinking. Use the
TIME(to set custom time).
If you would like the timer to turn on at the preset time for DAWN, press ENTER and move to P1 OFF setting.
If you would like the timer to turn on at the preset time for DUSK, use the
If you would like to choose a custom time other than DAWN or DUSK, use the
the correct hour is selected, press ENTER to confirm. The minutes should be blinking. Use the
be active, and press ENTER. Now that you have chosen the days, the timer will function, and the next step is to choose the time the program will turn off. Use the
After programming the P1 OFF time, press ENTER to confirm. The screen will now say SAVE. Press ENTER to save program 1 to the timer. P2 ON (Program 2 on) should be blinking. Press ENTER to begin setting P2 ON. You may also use the
push AUTO to complete the programming and start the timer.
Random Security Option:
The random feature RND will delay turning the lights off. The delay of 2 to 30 minutes is randomly selected by the timer each day to give the house a more lived in appearance while the occupant is away.
1. Push RND (Random) button to activate the Random feature. The screen will change from AUTO to RND.
2. Push AUTO to button to de-activate the Random feature and return the timer to its current programming.
Central
Hawaii
qor p
buttons to change the option on the screen to DUSK, and press ENTER, and move to P1 OFF setting.
q
p
and
buttons to change the option on the screen to TIME, and press ENTER. The hour should be blinking. Use the
qor p
buttons to set the correct minute, then press ENTER to confirm selection. The screen will show PRG P1 OFF, and the days of the week will be blinking. Choose the days you want the program to
The screen will now show DUSK (Sunset) and a default time with the hour blinking. This is the timer's preset time for
DUSK. If the hour is not correct, use the qor p buttons to select the correct hour to match DUSK for you area. Press
ENTER to confirm the hour. The minutes are now blinking. If the minutes are not correct, use the qor p buttons to
change the minutes to match DUSK for your area. Press ENTER to confirm the selection.
12. The screen will now say SAVE. Press ENTER to save today's date, time and location data to the timer.
North
Programming ON/OFF Events:
1. To begin programming ON/OFF times, press SETUP twice.
2. P1 ON (Program 1) ON will show on screen, and 1 should be blinking. Press ENTER to begin setting P1 ON time, OR you may also use the
qor p
buttons to scroll any one of the 7 available programs.
3. After pressing ENTER , the screen will show SET. If you wish to set a time, press ENTER to confirm. You may also use the
to scroll to DEL. If you press ENTER on DEL, you will delete the program you are on.
If you push ENTER at SET for P1, the screen will show PRG, P1 ON, and the days of the week will be blinking. Use the
South
through the options in which the timer will be active. The options are:
Mo, Tu, We, Th, Fr, St, Su (default);
Individual days;(Choose a single day)
Mo, We, Fr;
Tu, Th, St;
Mo, Tu, We, Th, Fr;
St, Su;
Select the days you want the program to be active and press ENTER to confirm the selection.
qor p
to scroll through the three switching time options which are DAWN, DUSK (the programmed times selected during timer setup) or
qor p
buttons to scroll through the 3 options DAWN, DUSK, or TIME, and precede the same as you did for PROG1 ON.
qor p
buttons to set the correct hour. If you pass 11 to 12, you will change the AM to PM. Once
qor p
buttons to scroll through all 7 programs, or
TMDW60
qor p
buttons
qor p
buttons to scroll