Ames Instruments 64020 Instrukcja obsługi i instrukcje bezpieczeństwa - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja obsługi i instrukcje bezpieczeństwa dla Przyrządy pomiarowe Ames Instruments 64020. Ames Instruments 64020 16 stron. 400a ac digital clamp meter

Drukuj stronę
Operating Instructions
Read the ENTIRE IMpORTANT SAFETY INFORMATION section
at the beginning of this manual including all text under
subheadings therein before set up or use of this product.
Electrical shock can cause death or injury! NEVER TOUCH
exposed conductors of
General Operation
Data Hold Button
Keep current reading on display.
1.
Press
button to keep current
HOLD
reading.
HOLD
Hz% Button
Switch between frequency and duty cycle measurements. See page 12.
REL Button
Show difference between two
readings in AC Current and
AC/DC Voltage. See page 9.
Backlight
1.
Press and hold
until Backlight turns on.
Note:
will appear on Display.
HOLD
2.
Press
button again
HOLD
to release hold.
3.
When finished, press and hold
button until Backlight turns off.
Worklight
1.
Press Worklight button to
turn on Worklight.
Auto power Off
Meter will automatically turn off after 30 minutes of non-use. To
conserve battery power, turn Meter off after use.
Page 8
electricity.
will appear on Display.
button
HOLD
HOLD
For technical questions, please call 1-888-866-5797.
2.
Press
button to release hold.
HOLD
Zero out Test Lead resistance to
obtain accurate low resistance
reading. See page 11.
Zero out initial capacitance
reading. See page 11.
Note:
will appear on Display.
HOLD
4.
Press
button again
HOLD
to release hold.
Note: Frequent use of backlight
will shorten battery life.
2.
Press Worklight button again
to turn off Worklight.
Item 64020