Acer AcerPower SP Podręcznik użytkownika - Strona 15

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Pulpit Acer AcerPower SP. Acer AcerPower SP 21 stron. Acer acerpower sp: users manual

3.3. Installing PCI cards

1. Find an empty PCI slot on the motherboard.

2. Remove the screw holding the bracket to back panel and remove the bracket.

3. Take the new PCI card from its protective bag.

4. Position the PCI card in the slot and gently press to insert it.

5. Secure the card to your computer with the screw removed earlier.

When you restart the system, BIOS (Basic Input/Output System) will automatically

detect and allocate the resources to the new PCI device.

To remove PCI card, you only need to open the computer and remove the

undesired card.

Memory can be upgraded to a maximum of 2 GB. This can be done by adding the

additional 128MB, 256MB, 512MB or 1GB PC 2100 DDR DIMM to two of the

184-pin DDR sockets locate on the motherboard. See below.

1. Align the DDR DIMM with the socket.

2. Push the DDR DIMM into the socket until the clips lock onto the DDR

DIMM.

Remark: The DDR DIMM sockets are slotted to ensure proper installation. If you

insert a DDR DIMM but it does not fit easily into socket, you may have inserted it

incorrectly. Turn the DDR around and try to insert it again.

1. Press the holding clips on both sides of the DDR socket outward to release the

DDR.

2. Gently pull the DDR out from the socket.

The system will automatically detect the amount of memory installed. Run the

BIOS utility to view the new value for total system memory and make a note of it.