Cogvis fearless Instrukcja instalacji - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Akcesoria Cogvis fearless. Cogvis fearless 12 stron.

Now carefully stow the cable in the housing. Make sure that the push-button

(on the inside of the housing) is free (not covered by the black cable).

Also make sure that you close the housing in such a way that the power

connection of the board is at the corresponding opening of the housing.

Now mount the housing onto the metal plate as follows:

Step 1:

Place the housing from bottom to top. Make sure

that the metal plate is outside the clamp of the

housing.

Step 3:

Now press the housing onto the metal plate until it

clicks into place.

Now continue with software setup.

Step 2:

Hook the clamps from the housing to the metal

plate. Press the casing together to connect it to

the metal plate at the top edge.

fearless

Installation guide

Page 8 of 12