Canon CanoScan 8000F Skrócona instrukcja obsługi - Strona 15

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Skaner Canon CanoScan 8000F. Canon CanoScan 8000F 19 stron. Usb flatbed scanner
Również dla Canon CanoScan 8000F: Specyfikacje (2 strony)

Drukuj stronę

Simple Mode

In the [Select source] category, select [Film].

In the [Film type] category, select [Nega/Sleeve] or

[Posi/Sleeve].

• Only film strips can be scanned in Simple

mode. To scan slides, switch to the Advanced

mode by clicking the [Advanced Mode]

button on the bottom right of the window.

In ScanGearCS's Simple Mode,the settings for film scanning

are pre-set so that 35 mm film can be scanned and printed at

the photo size. The Output Resolution is pre-set to 300 dpi and

the Print Size to the photo size (8.9 x 12.7 cm/3.5 x 5 in.).

Advanced Mode

Select the film type in the [Select source] category.

Select an option from the following.

• Color Negative Film

• Color Positive Film

• B&W Negative Film

• B&W Positive Film

Select options for other categories as required, such

as the Color Mode or Output Resolution.

Output Resolution is the resolution when an image is enlarged

to a print size (8.9 x 12.7 cm/3.5 x 5 in.). You are recom-

mended to select the following resolutions for the respective

uses of the image.

• For viewing on a computer screen or attaching to an e-mail message: 75 dpi

• For printing at standard print sizes: 300 dpi

• A warning message will display if you set the Output Resolution too high. If you proceed

anyway, it may take an extremely long time to scan and yield a very large image file.

Scanning Film