ASTRO HVC 42 Instrukcja obsługi - Strona 12

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wzmacniacz ASTRO HVC 42. ASTRO HVC 42 20 stron. Broadband amplifiers

page 12

The general terms and conditions of ASTRO Strobel GmbH apply.

They can be found in the current catalogue or on the Internet under

"www.astro-kom.de".

The HVC 32 and HVC 42 are universal broadband amplifiers for

bidirectional building distribution and broadband communication

systems. They are exclusively designed for signal amplification in

unidirectional and bidirectional distribution systems in single-family

and multi-family dwellings.

In order to use the device properly, you must carefully read the

following safety and operating instructions.

The HVC 32 and 43 amplifiers can be flexibly configured for future

multimedia cable networks:



Adaptation of local level conditions using the adjustable built-in

attenuator and equaliser in the input



Pre-equalisation of the outgoing cable lines is possible using

the interstage slope

ATTENTION

in the return path input screwed in to avoid a possible

network malfunction or the destruction of the device upon

being connected. This setting must not be changed in

networks that do not use a return path!

NOTE

The gain values given in the "Technical data"

section apply when two setting elements (input equaliser and

interstage slope) are used.

All of our packaging materials (cardboard boxes, inserts, plastic film

and bags) are completely recyclable.

After use, this device must be disposed of in an orderly manner as

electronic scrap, in accordance with the current disposal regulations

of your district/country/state.

ASTRO Strobel is a member of the Elektro system solution for the

disposal of packaging materials. Our contract number is 80395.

Warranty conditions

The device is delivered with the attenuator

Operating manual HVC 32 a. HVC 42 -

Warranty conditions

Version 01-2021A