FLYFANS K-8 Karakorum Jet Trainer Instrukcja montażu - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja montażu dla Zabawka FLYFANS K-8 Karakorum Jet Trainer. FLYFANS K-8 Karakorum Jet Trainer 8 stron. 64mm edf rc jet
Drukuj stronę
Horizontal stabilizer Servo
Set 9g servo to neutral point and screw on Servo arm. Glue the servo into the slot on the Hori-
1.
zontal Stabilizer. Suggested cable length is 15cm.
NOTE:
Require 1 normal and 1 reverse 9g Servo.
2. Ajust pushrods length then link the Servo arm and Control horn.
NOTE:
We recommend using the 3
Flap and Aileron Servo
3. Set 9g servos to neutral position and screw on the Servo
arms.
Glue servos into the slot, making sure the flap servo is in the
correct starting point and correct flap movement direction.
We recommend using the 3
Caution:
arm.
4. Align all cables along the cable slot. Glue Drop Tank pylon slot into the wing.
Model Assembly
hole on the servo arm
rd
hole on the Servo
rd
Servo
Horns
Arms
Horns