Acer Altos G500 Podręcznik użytkownika - Strona 34

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Pulpit Acer Altos G500. Acer Altos G500 36 stron. Acer aspire computer user guide

A: First, establish radio communication by pressing the connect button on

the front of the computer, and then pressing the connect button on your

mouse.

Next, check the quality of the batteries. With healthy batteries you should

be able to use your cordless mouse and keyboard at least 1 meter/4 feet

from the receiver. If the problem persists after replacing the batteries,

you can assume that there is an environmental problem. You can confirm

this by checking the performance of your mouse and keyboard with

another computer in a different location.

To avoid interference with the radio signal, try moving your system at

least 8 inches away from other electrical devices, or moving the mouse

and keyboard closer to the computer. If you are using a metal desk or a

desk with a metal frame, try raising the computer, mouse and keyboard

an inch or so above the surface using a thick mouse pad or a book.

Experiment with different locations and positions.

Q: Will my cordless mouse or keyboard interfere with my cordless

phone?

A: It is most unlikely. Your cordless mouse and keyboard operate at such low

frequencies that they generally do not interfere with most other cordless

devices.

Q: What can cause interference with my cordless mouse and key-

board?

A: Any electrical device, including the monitor, drives and speakers can

cause interference with your cordless mouse and keyboard. A metal desk

or a desk with a metal frame can also cause interference problems.

Q: How many cordless devices can I use in one area?

A: Cordless devices have a range of 2 meters/6 feet, although this might be

greater under certain conditions. To avoid possible interference, try to

keep systems at least 3 meters/10 feet apart.

There is no specific number of cordless devices that you can be used in an

area, as there are many environmental variables that affect performance.

Q: When I move my cordless mouse, it moves the cursor on the sys-

tem next to mine. How can I stop this?

A: This is called "cross talk" and is characterized by one cordless device

controlling the cursor input of another device connected to a different

computer.