Canon IMAGECLASS MF4150 Instrukcja obsługi rozrusznika - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja obsługi rozrusznika dla Skaner Canon IMAGECLASS MF4150. Canon IMAGECLASS MF4150 19 stron. Laser multifunction
Również dla Canon IMAGECLASS MF4150: Arkusz specyfikacji (2 strony), Instrukcja obsługi rozrusznika (19 strony), Broszura (2 strony)
Drukuj stronę
Connect Power Cord
Connect the Power Cord and Turn On the Machine
1
Main power switch
Connect the power cord into the rear socket and
the wall outlet, and press the [I] side of the main
power switch to ON.
What if...
● <CLOSE COVER/PRINTER COVER> is displayed:
Make sure that the printer cover and scanning platform are closed properly. (See "Install Toner Cartridge," on p.
5.)
● <TONER IS NOT SET/INSERT TONER> is displayed:
Make sure that the toner cartridge is installed properly. (See "Install Toner Cartridge," on p. 5.)
● <LOAD PAPER> is displayed:
Make sure that paper is loaded in the machine. (See "Set Up the Paper Trays and Load Paper," on p. 7.)
11
2
Ex.
1 0 0 %
A 4
T E X T / P H O T O
1
The machine enters the standby mode.
WARNING
This product emits low level magnetic flux. If you use a
cardiac pacemaker and feel abnormalities, please move
away from this product and consult your doctor.
NOTE
– During electrical storms, disconnect the power cord
from the power outlet. (Please note that any
documents stored in the machine's memory will be
deleted when you unplug the power cord.)
– Whenever you unplug the machine, wait at least five
seconds before you plug it in again.
– Do not plug the machine into an uninterruptible power
supply (UPS).
12