CohuHD Costar 3212-2000 Skrócona instrukcja obsługi - Strona 5
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Przyrządy pomiarowe CohuHD Costar 3212-2000. CohuHD Costar 3212-2000 17 stron. Thermometric system
Drukuj stronę
4.
The Thermal Calibration Reference Device should be installed in the camera's field of view, ideally at
the same height. The best horizontal distance from the camera to the Thermal Calibration Reference
Device is 13 feet (4 meters) with an acceptable range of 10–16 feet
(3–4.8m).
5.
The camera should be installed at a height of
horizontally to the faces of people in the scene.
6.
Installing the camera straight relative to a human face will yield the best results. (Verify the side face
angle is less than 35° on either side from the intended target).
Configure the Camera
Access the camera using an HTML5 web browser, such as Google
Explorer
®
(IE). When using IE the camera requires ActiveX
default IP address is 192.168.0.121; the default username and password are both admin.
1. Connect your camera to your LAN or a standalone network. Your computer should be on the same
network.
2. Power on the camera.
(requires 10W) or the supplied 12VDC power supply. It may take several minutes for the camera to
start up.
3.
Open your web browser and go to 192.168.0.121.
4. Enter admin for both the username and password. You should change the default password after
you log in.
CohuHD 3212-2000 Thermometric System Quick Start Guide
6.5–7.5 feet
The camera can be powered via a PoE
(2.0–2.3m), with an angle less than 25°
®
®
Chrome
, or Microsoft
®
controls to display the video. The camera's
802.3af
enabled network switch
®
Internet
4